TSO Exhaust Tips
Labor Day Promo: $50 Off Exhaust Tips
CUSTOMIZATION MADE EASY
SELECT YOUR DESIGN. SELECT YOUR SIZE.
Make your build standout and your buddies jealous
Our MOST POPULAR Exhaust Tip
Ties Your Build Together
Powder coated, polished, and raw finish options
304 Stainless Steel and Aluminum for decreased weight and rust prevention
Rust-Free, No Matter the Elements
Select Overlay Exhaust Tip Size
Show off your patriotism everywhere you go
Powder coated and polished finish options to tie your build together
100% 304 Stainless Steel Construction for a lifetime of corrosion resistance.
Rust-Free, No Matter the Elements
Simple design adds a clean look to your build!
Powder coated, raw, and polished finish options to tie your build together
100% 304 Stainless Steel Construction for a lifetime of corrosion resistance.
Rust-Free, No Matter the Elements
Select Octagon Exhaust Tip Size
Show off your patriotism everywhere you go
Powder coated and polished finish options to tie your build together
304 Stainless Steel and Aluminum for decreased weight and rust prevention
Rust-Free, No Matter the Elements
Aftermarket Exhaust Size
-
Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.
-
Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.
-
If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.
-
If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.
Outlet Size Recommendations
-
6 Inch
-
Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.
-
-
7 Inch
-
Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.
-
-
8 Inch
-
Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.
-
-
10 Inch
-
Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.
-
Aftermarket Exhaust Size
-
Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.
-
Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.
-
If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.
-
If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.
Outlet Size Recommendations
-
6 Inch
-
Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.
-
-
7 Inch
-
Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.
-
-
8 Inch
-
Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.
-
-
10 Inch
-
Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.
-
Aftermarket Exhaust Size
-
Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.
-
Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.
-
If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.
-
If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.
Outlet Size Recommendations
-
6 Inch
-
Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.
-
-
7 Inch
-
Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.
-
-
8 Inch
-
Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.
-
-
10 Inch
-
Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.
-
Aftermarket Exhaust Size
-
Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.
-
Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.
-
If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.
-
If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.
Outlet Size Recommendations
-
6 Inch
-
Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.
-
-
7 Inch
-
Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.
-
-
8 Inch
-
Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.
-
-
10 Inch
-
Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.
-
Aftermarket Exhaust Size
-
Diesel Trucks equipped with an aftermarket exhaust system typically have a 4” or 5” inlet size.
-
Gas Trucks equipped with aftermarket exhaust systems often have 2.5”, 3”, 3.5”, or 4” inlet sizes.
-
If you are unsure which size you need, measure the diameter (across the opening). Then select the same size as your exhaust.
-
If your exhaust measures between sizes, size up as the tabs will close to fit your exhaust.
Outlet Size Recommendations
-
6 Inch
-
Recommended for stock or leveled diesel/gas trucks. The smallest tip size we offer to give a stock-ish look and sound.
-
-
7 Inch
-
Recommended for leveled or slightly lifted diesel/gas trucks. It's a good blend of size and sound. Not too big and not too loud.
-
-
8 Inch
-
Recommended for leveled or lifted diesel trucks. By far, our most popular size and what we run on our company show truck. They offer the improved sound without being too big. Looks good out the rear or as an axle dump.
-
-
10 Inch
-
Recommended for lifted diesel trucks. Perfect for those who want a massive exhaust tip with the deepest sound. Works best as an axle dump.
-
How long does it take to receive my order?
Our products are designed, manufactured and powder coated in the USA with a current lead time of 3 - 6 weeks
Unlike a lot of our competitors that purchase a large bulk order of cheaply made exhaust tips from China, we do the opposite. Ensuring that you receive a High-Quality exhaust tip with a 100-Day Satisfaction Guarantee.
Is it easy to install TSO exhaust tips?
YES! We take pride in the fact that our exhaust tips are Patented through the USPTO (United States Patent and Trademark Office) making it very easy to install
Is there a sound guide available to help me hear what the exhaust tip will sound like?
YES! We put together an informative exhaust sound guide to help you select the right size exhaust tip - Click the photo below to preview TSO is included in your order!
Does it come with the necessary mounting hardware?
YES STAINLESS STEEL HARDWARE IS INCLUDED! Shop with confidence to know that everything needed to install your Exhaust Tip from TSO is included in your order!
Is there a warranty included on your Exhaust Tips?
YES! TSO offers a factory 100 day Money-Back Guarantee and a 6 month manufacturing warranty for each of our Exhaust Tips at no additional cost.
Additional options to purchase an extended warranty are available for 12 and 24 months. .
Can I weld the exhaust tip to my current exhaust?
NO. there is no need to weld this exhaust tip. Additionally, Welding the tip to your exhaust will VOID the warranty. When welding, the metal around the weld becomes weaker which could lead to the tabs breaking off.
What’s unique about your Patented exhaust tips?
Our Patented Tabbed Inlet design utilizes a flow through design to aid in cooling the tip to prolong the finish.
Since we use heavy-duty American 304 Stainless Steel, our exhaust tips are heavier than other tips on the market, so we had to get creative because a band clamp cannot support the weight of an 8lb exhaust tip. We needed a physical object, or a bolt, to prevent the tip from sliding up and down your exhaust as you hit potholes or bumps on the trail.
The Tabbed Inlet solved that while cutting the build time in half, which means a lower cost item to produce and in turn, a higher quality exhaust tip for less.
Can I use your exhaust tip offroad?
YES!
Our exhaust tips are made for heavy duty 18 Gauge 304 Stainless Steel and treated with a 4-Stage powder coat.
What makes TSO Manufacturing different than other automotive manufacturers?
Us - VS- Others
Heavy-duty American 304 Stainless Steel vs. Thin Chinese Steel
Made in America 🇺🇸 vs Made in China
Patented Tabbed Inlet Design vs. Round Inlet
Security Built In vs. Welding Required
4-Stage Powder Coating Process vs. Spray and Hope it Lasts
6 Month Warranty vs. No Warranty
Questions? Give us a call, 423-524-9311 or email info@tso.co
SEE WHAT OTHERS HAVE TO SAY ABOUT OUR PRODUCTS
TSO Manufacturing - 2024 ©
All rights reserved.