F250/F350

F150

2500/3500

1500

2500/3500

Traction bars are designed to prevent axle wrap and wheel hop. Axle wrap happens when the torque at the rear wheels causes the axle to go the opposite direction of the tires. From the factory, the rear axle is basically floating on springs and shocks, only attached by U-bolts and the driveshaft.

Some drilling is required, depending on the vehicle. We use as many factory mounting holes as possible, but some YMMs require drilling and tapping the frame.

Click Here to select your vehicle.

Traction Bars themselves are laser cut from 3/16 inch Steel, along with the brackets being cut from 1/4 inch Steel.

We do not offer custom color match finishes at this time; however, we have a raw finish option available for you to have coated to match your truck.

We recommend having the same finisher do all of your parts to ensure the colors match. Just because you use the same powders, does not mean the finished product will be the same color.

Plus, we remove the finishing cost to save you a bit of money.